What does your spray need to do?
Start with the job: clean, cool, coat, humidify, scrub or suppress. Each application page explains which nozzle types work and why.
Browse by process goal
Dust Suppression
Droplets capture airborne dust best when they are close to the dust particle size. Here is how nozzle choice, pressure and placement affect results.
Explore
Tank Cleaning
Spray balls, rotating heads and jet cleaners that clean vessels faster with less water and chemical.
Explore
Storm Tank Cleaning
Flushing jets and nozzles that clear sediment from storm tanks and sumps automatically.
Explore
Industrial Cleaning
Impact, coverage and flow matched to the soil being removed, from parts washers to conveyor belts.
Explore
Spray Cooling
Controlled water sprays that remove heat from products, equipment and gas streams evenly.
Explore
Gas Cooling
Fine atomisation that evaporates completely in the gas stream, cooling and conditioning flue gas without wetting ducts.
Explore
Gas Scrubbing
Nozzles for wet scrubbers and absorption towers that maximise gas-liquid contact while resisting clogging and corrosion.
Explore
Humidification
Fine fog that raises humidity without wetting surfaces, for textiles, printing, storage and greenhouses.
ExploreFluid Injection
Lances and nozzles that dose chemicals, reagents and steam into pipes, ducts and reactors.
ExploreLubrication
Thin, even oil films on chains, gears, moulds and conveyors, with less waste.
ExploreMoistening
Precise, even moisture on paper, textiles, food and bulk materials.
Explore
Odour Control
Neutralising agents atomised into fine mist that meets odour molecules in the air at landfills, STPs and transfer stations.
ExploreSpray Coating
Uniform, controlled coatings of release agents, oils, glazes and food coatings.
ExploreSpray Drying
Consistent droplet size for consistent powder in dairy, food, chemical and ceramic spray dryers.
ExplorePretreatment
Clip-on, ball-joint and plastic nozzles for degreasing, phosphating and rinse stages before painting.
Explore
Fire Protection
Water curtains, cooling sprays and fine mist for fire protection and prevention duties.
Explore
Fluid Mixing
Eductors and nozzles that keep tanks mixed and solids suspended without mechanical agitators.
ExploreFoam Control
Knock down foam in tanks, aeration basins and process vessels with water or defoamer sprays.
ExploreWhat we need to recommend a solution
Share the process conditions and we will suggest the nozzle type, size and layout.
Process goal
What the spray must achieve: clean, cool, coat, humidify, scrub or suppress.
Liquid
Water, chemical, slurry or oil; temperature, viscosity and solids content.
Flow & pressure
Available supply pressure and the flow per nozzle or per header.
Geometry
Tank, duct, conveyor or chamber dimensions and nozzle mounting points.
Materials
Corrosion, temperature or hygiene needs that decide the nozzle material.
Frequently asked questions
Can you recommend a nozzle from my process data?
Yes. Share the liquid, flow, pressure and geometry and we will recommend the pattern, size and material.
Do you supply complete systems or only nozzles?
Both: individual nozzles, spray headers and complete systems with pumps, filtration and controls.
Can I get a sample or trial?
Talk to us about your application; trial quantities can be discussed for qualified projects.