Clip-On Spray Nozzles
Clamp-on nozzles that fit directly onto a pipe header, so installation and replacement take minutes.
Clip on Spray Nozzles | Nozzle Clip
Synergy Spray Systems manufacture Clip on / clamp on spray Nozzles in various plastic material including PVC, PP and other variants based on customer requirements. clamp on Nozzles can be also made in SS304 and SS316 materials. Clip On nozzle is available in both Flat fan, Hollow cone and Full cone flow pattern. Clip on nozzle can be directly clamped to the pipe without any requirement for connectors which helps in quick replacement of nozzles incase of replacement as well as cleaning.
| Product Name | Low Pressure Plastic Water Spray Clip-on Pipe Clamping Nozzle |
> Adjustable ball plastic water spray nozzle with pipe clamp is made of plastic or PP (polypropylene) with long glass fiber to enhance the performance of wear-resistance , corrosion and heat resistance.
> Clamp is made of high-quality food-grade 304 or 316 stainless steel.
> Three models of spraying: Full cone type, Hollow cone type, and flat fan spray type
> We supply the nozzles for various fields, with the biggest supply for coating or painting treatment or raining test during automobile manufacturing
How to choose the right nozzle
Five inputs decide almost every spray nozzle selection. Tell us these and we will shortlist the model.
Spray pattern
Full cone, hollow cone, flat fan, solid jet or fine mist, chosen by the area and the job.
Flow & pressure
Required flow (LPM) at the available pressure (bar) sets the orifice size.
Spray angle & distance
Coverage width at the target distance determines angle and spacing on the header.
Droplet size
Fine for evaporation and gas cooling; coarse for impact, washing and wetting.
Material & connection
Brass, SS 304/316, PP, PVDF or PVC; thread size and type (BSP/NPT) or clip-on.
Explore related nozzles and applications
Pretreatment
Clip-on, ball-joint and plastic nozzles for degreasing, phosphating and rinse stages before painting.
Explore
Plastic Nozzles
Corrosion-resistant nozzles in PP, PVDF and PVC for chemicals, pretreatment tunnels, plating lines and scrubbers.
Explore
Full Cone Nozzles
A solid, cone-shaped spray that covers a round area evenly. Used where uniform coverage matters: gas cooling, washing, dust suppression and scrubbers.
Explore
Flat Fan Nozzles
A tapered or even sheet of liquid for line coverage on conveyors, washers, coating lines and spray booms.
Explore
Hollow Cone Nozzles
A ring-shaped spray with smaller droplets than a full cone at the same flow. Preferred for gas cooling, scrubbing and evaporation duties.
Explore
Jet Nozzles
A concentrated, high-impact stream for cleaning, descaling and reaching distant targets.
ExploreQuestions about clip-on nozzles
Can you supply nozzles to match my existing ones?
Yes. Share the model or a photo, the thread size, spray angle and flow, and we will propose an equivalent.
Which material should I choose?
Brass for general water duties, SS 304/316 for corrosion and temperature, and PP, PVDF or PVC for aggressive chemicals.
Why are my nozzles clogging?
Usually from debris or scale. Add or improve filtration, choose a larger free passage design such as spiral nozzles, and clean nozzles on a schedule.
Do you supply in bulk?
Yes, we supply single replacements as well as bulk orders for OEMs and project quantities.