Spiral Spray Nozzles
An open, clog-resistant design that delivers high flow through a large free passage: ideal for scrubbers, slurries and dirty water.
Spiral Spray Nozzle
We design, manufacture and supply various Spiral spray nozzles generally made of Stainless Steel, Brass, PVC, PP and various other material as per customer requirement. Features of the Spiral Design: Atomization is achieved by the water shearing along the turns of the spiral. Gives finest droplet size of any direct pressure nozzle. Designed for droplet size, not evenness of pattern. No internal parts.
Sprial spray nozzles are generally used in the application which requires large liquid flow at low pumping pressure and 360 degree full cone coverage. Spray angle ranges from 60° to 180° with unobstructed flow passage whcih minimize clogging potenetial.
Spiral Spray Distribution
Spray nozzles are precision components designed to yield very specific performance under specific conditions determine the best nozzle type for your application.
Two types of spray patterns are available
Spiral full cone nozzle
Spiral hollow cone spray nozzle.
Spiral Spray Nozzle Specification
- Spray Angle: 30°, 45°, 60°, 90°, 120°
- Flow rate lpm at pressure from 2 to 10 bar: 2 to 170 LPM
- Connection: 1/8" to 1/2" NPT / BSPT / BSP (Both Male and Female Connectors)
- Materials: Brass, SS-316, SS-304, Mild Steel, Hastalloy, Titanium, PVC, Plastic, Nylon, PVDF, PP.
Materials and specification can be customized based on application and requirements.
FAQ
How to choose the right nozzle
Five inputs decide almost every spray nozzle selection. Tell us these and we will shortlist the model.
Spray pattern
Full cone, hollow cone, flat fan, solid jet or fine mist, chosen by the area and the job.
Flow & pressure
Required flow (LPM) at the available pressure (bar) sets the orifice size.
Spray angle & distance
Coverage width at the target distance determines angle and spacing on the header.
Droplet size
Fine for evaporation and gas cooling; coarse for impact, washing and wetting.
Material & connection
Brass, SS 304/316, PP, PVDF or PVC; thread size and type (BSP/NPT) or clip-on.
Explore related nozzles and applications
Gas Scrubbing
Nozzles for wet scrubbers and absorption towers that maximise gas-liquid contact while resisting clogging and corrosion.
Explore
Fire Protection
Water curtains, cooling sprays and fine mist for fire protection and prevention duties.
Explore
Spray Cooling
Controlled water sprays that remove heat from products, equipment and gas streams evenly.
Explore
Full Cone Nozzles
A solid, cone-shaped spray that covers a round area evenly. Used where uniform coverage matters: gas cooling, washing, dust suppression and scrubbers.
Explore
Flat Fan Nozzles
A tapered or even sheet of liquid for line coverage on conveyors, washers, coating lines and spray booms.
Explore
Hollow Cone Nozzles
A ring-shaped spray with smaller droplets than a full cone at the same flow. Preferred for gas cooling, scrubbing and evaporation duties.
ExploreQuestions about spiral nozzles
What is spiral spray nozzles?
The spiral nozzle, sometimes called helix, pigtail, or corkscrew, disperses liquid as it shears along the turns of the spiral.
Spiral spray nozzle features?
- Atomization is achieved by the water shearing along the turns of the spiral.
- Gives finest droplet size of any direct pressure nozzle.
- Designed for droplet size, not evenness of pattern.
- No internal parts.
Spiral nozzle common application?
- Exhaust gas scrubbing, including ship gas scrubbing, flue gas scrubbing.
- Gas cooling
- Washing and rinsing
- Fireproofing and fire extinguishment
Can you supply nozzles to match my existing ones?
Yes. Share the model or a photo, the thread size, spray angle and flow, and we will propose an equivalent.
Which material should I choose?
Brass for general water duties, SS 304/316 for corrosion and temperature, and PP, PVDF or PVC for aggressive chemicals.
Why are my nozzles clogging?
Usually from debris or scale. Add or improve filtration, choose a larger free passage design such as spiral nozzles, and clean nozzles on a schedule.
Do you supply in bulk?
Yes, we supply single replacements as well as bulk orders for OEMs and project quantities.