Slip Lock Connectors
Push-fit fittings for high-pressure misting tubing: straight connectors, tees, elbows and end plugs.
Prominent & Leading Manufacturer from Chennai, we offer brass slip lock connector, ss slip lock connector, slip lock connector and slip lock t connectors.
We are Manufacturing :
Prominent & Leading Manufacturer from Chennai, we offer brass slip lock connector, ss slip lock connector, slip lock connector and slip lock t connectors.Prominent & Leading Manufacturer from Rajkot, we offer brass slip lock connector, ss slip lock connector, slip lock connector and slip lock t connectors.
How to choose the right nozzle
Five inputs decide almost every spray nozzle selection. Tell us these and we will shortlist the model.
Spray pattern
Full cone, hollow cone, flat fan, solid jet or fine mist, chosen by the area and the job.
Flow & pressure
Required flow (LPM) at the available pressure (bar) sets the orifice size.
Spray angle & distance
Coverage width at the target distance determines angle and spacing on the header.
Droplet size
Fine for evaporation and gas cooling; coarse for impact, washing and wetting.
Material & connection
Brass, SS 304/316, PP, PVDF or PVC; thread size and type (BSP/NPT) or clip-on.
Explore related nozzles and applications
Misting & Fogging
High-pressure pumps, fine mist nozzles and controls engineered as one system, for cooling, humidification, odour and dust control.
Explore
Misting Pumps
The heart of a misting system: a high-pressure pump with filtration, motor and controls matched to the nozzle count.
Explore
Full Cone Nozzles
A solid, cone-shaped spray that covers a round area evenly. Used where uniform coverage matters: gas cooling, washing, dust suppression and scrubbers.
Explore
Flat Fan Nozzles
A tapered or even sheet of liquid for line coverage on conveyors, washers, coating lines and spray booms.
Explore
Hollow Cone Nozzles
A ring-shaped spray with smaller droplets than a full cone at the same flow. Preferred for gas cooling, scrubbing and evaporation duties.
Explore
Jet Nozzles
A concentrated, high-impact stream for cleaning, descaling and reaching distant targets.
ExploreQuestions about slip lock connectors
Can you supply nozzles to match my existing ones?
Yes. Share the model or a photo, the thread size, spray angle and flow, and we will propose an equivalent.
Which material should I choose?
Brass for general water duties, SS 304/316 for corrosion and temperature, and PP, PVDF or PVC for aggressive chemicals.
Why are my nozzles clogging?
Usually from debris or scale. Add or improve filtration, choose a larger free passage design such as spiral nozzles, and clean nozzles on a schedule.
Do you supply in bulk?
Yes, we supply single replacements as well as bulk orders for OEMs and project quantities.