Flat Fan Spray Nozzles
A tapered or even sheet of liquid for line coverage on conveyors, washers, coating lines and spray booms.
Flat Fan Nozzle
SYNERGY SPRAY SYSTEMS is a leading manufacturer and supplier of vairous models of flat fan spray nozzles in India at best price.
A flat fan spray nozzle serves the purpose of spraying onto a surface or an object moving in a transverse direction with respect to the direction of the jet, a typical example being the nozzles in a car washing tunnel. Usually flat fan spray nozzles are designed based on the customer spray pattern requirements.
Types of Flat Fan Nozzles
INLINE FLAT FAN (Pressure nozzle) : This is the general purpose flat fan nozzle where the liquid enters the nozzle in line with the axis length and is fed to a pressure chamber from where it is ejected through the nozzle orifice. Flow value and spray angle are determined respectively from the orifice cross section and the orifice edge profile.
INLINE STRAIGHT JET (Pressure nozzle) : Straight nozzles can be considered as flat fan nozzles as the only difference is the spray angle which is zero degrees in solid jet nozzles. These nozzles are often used in high-pressure operating environments where the wear resistance of the nozzles is very important. It ensures optimum service life and spray orientation. Apart from the standard brass, 303SS and 316SS, Synergy Spray offers these nozzles in a wide range of wear resistant materials.
Flat Fan Nozzle Specification
INLINE FLAT FAN (Pressure nozzle) :
- Spray Angle: 30°, 45°, 60°, 90°, 120°
- Flow rate lpm at pressure from 2 to 10 bar: 2 to 170 LPM
- Connection: 1/8" to 1/2" NPT / BSPT / BSP (Both Male and Female Connectors)
- Materials: Brass, SS-316, SS-304, Mild Steel, Hastalloy, Titanium, PVC, Plastic, Nylon, PVDF, PP.
Materials and specification can be customized based on application and requirements.
FAQ
How to choose the right nozzle
Five inputs decide almost every spray nozzle selection. Tell us these and we will shortlist the model.
Spray pattern
Full cone, hollow cone, flat fan, solid jet or fine mist, chosen by the area and the job.
Flow & pressure
Required flow (LPM) at the available pressure (bar) sets the orifice size.
Spray angle & distance
Coverage width at the target distance determines angle and spacing on the header.
Droplet size
Fine for evaporation and gas cooling; coarse for impact, washing and wetting.
Material & connection
Brass, SS 304/316, PP, PVDF or PVC; thread size and type (BSP/NPT) or clip-on.
Explore related nozzles and applications
Industrial Cleaning
Impact, coverage and flow matched to the soil being removed, from parts washers to conveyor belts.
Explore
Spray Coating
Uniform, controlled coatings of release agents, oils, glazes and food coatings.
ExplorePretreatment
Clip-on, ball-joint and plastic nozzles for degreasing, phosphating and rinse stages before painting.
Explore
Agricultural Nozzles
Boom, crop, drone and flood nozzles for consistent coverage and controlled drift in crop protection and fertiliser spraying.
Explore
Full Cone Nozzles
A solid, cone-shaped spray that covers a round area evenly. Used where uniform coverage matters: gas cooling, washing, dust suppression and scrubbers.
Explore
Hollow Cone Nozzles
A ring-shaped spray with smaller droplets than a full cone at the same flow. Preferred for gas cooling, scrubbing and evaporation duties.
ExploreQuestions about flat fan nozzles
What is a flat fan nozzle used for?
These are the most common nozzles used for turf applications and produce a fine to the medium droplet. Spray coverage is excellent but drift may be a concern. Air-induction These nozzles produce a medium to coarse droplet which shatters upon contact with the leaf blade to provide better coverage.
How does a flat fan nozzle work?
Flat-fan nozzles are widely used for broadcast spraying of herbicides. The band width can be controlled with the nozzle height and the spray angle. The low-pressure flat-fan develops a normal flat-fan angle and spray pattern at operating pressures between 15 and 20 psi.
Flat fan nozzles benefits?
- Excellent impact enables high efficiency.
- Uniform liquid and impact distribution.
- Particularly powerful jets at spraying angles of up to 60°
- Flow geometry of the nozzle allows to produce accurate, compact jets.
- Reliable documentation of nozzle performance data.
Can you supply nozzles to match my existing ones?
Yes. Share the model or a photo, the thread size, spray angle and flow, and we will propose an equivalent.
Which material should I choose?
Brass for general water duties, SS 304/316 for corrosion and temperature, and PP, PVDF or PVC for aggressive chemicals.
Why are my nozzles clogging?
Usually from debris or scale. Add or improve filtration, choose a larger free passage design such as spiral nozzles, and clean nozzles on a schedule.
Do you supply in bulk?
Yes, we supply single replacements as well as bulk orders for OEMs and project quantities.